Influence of pulverized palm kernel and egg shell additives on the hardness, coefficient of friction and microstructure of grey cast iron material for advance app...

Influence of pulverized palm kernel and egg shell additives on the hardness, coefficient of friction and microstructure of grey cast iron material for advance applications

~ Dda0e1644b0ab6af417a482784db4afe.200x200
Previous studies showed the effects of organic carbon on the mechanical properties of alloys. However, the mechanisms of graphite films formation have not been given due attention. In the present study, diffusion of carbon content via heat treatment process to produce graphite films is presented using microstructure. Consequently, the graphite films formed a protective layer on the heat...
 
Published at Result in Engineering
Published in 2019
 
Download 502.16 kB
 
visit (https://doi.org/10.1016/j.rineng.2019.100025)
 
 
Enesi Y. Salawu , Oluseyi O. Ajayi , Anthony Inegbenebor , Stephen Akinlabi , Esther Akinlabi
Salawu Enesi Yekini
 
Other publications by this author (view profile)
 
 
Analytical Technique for the Determination of Hoop Stress and Radial Stress on the Tooth Spur Gear under Vertical Loading in a Food Packaging Machine
 
Theoretical Modelling Of Thermal-Hoop Stress Around The Tooth Of A Spur Gear In A Filler Machine
 
Numerical Modeling and Evaluation of Involute Curve Length of a Spur Gear Tooth to Maintain Constant Velocity Ratio While in Motion
 
INVESTIGATION OF PRODUCTION OUTPUT FOR IMPROVEMENT
 
Cost of Corrosion of Metallic Products in Federal University of Agriculture, Abeokuta
 
Design, Production and Testing of a Single Stage Centrifugal Pump
 
Experimental Analysis of the Wear Properties of Carburized HSS (ASTM A600) Cutting Tool
 
ExperimentalandMathematicalModelingfor PredictionofToolWearontheMachiningof Aluminium6061AlloybyHighSpeedSteelTools
 
Impact of heat treatment on HSS cutting tool (ASTM A600) and its behaviour during machining of mild steel (ASTM A36)
 
MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY
 
Study of the performances of nano-case treatment cutting tools on carbon steel work material during turning operation
 
Failure Mode and Effect Analysis a Tool for Reliability Evaluation: Review
 
Effects of Process Parameters on Vibration Frequency in Turning Operations of Perspex Material
 
Investigation of the heat transfer effect of Ni/R134a nanorefrigerant in a mobile hybrid powered vapour compression refrigerator
 
Dataset on experimental investigation of optimum carburizing temperature and holding time of bi- nano additives treatment of AISI 5130 steel
 
ANALYTICAL STUDY OF A ROAD TRAFFIC CONFLICT AT THE T-JUNCTION OF UNIVERSITY OF BENIN MAIN GATE
 
Nigeria Vision 20:2020; Review of Current Status Using Re Development and Gross Domestic
 
A Reliability-Centered Maintenance Study for an Individual Section-Forming Machine
 
Pareto Analysis of Product Quality Failures and Cost Effects in Bottling Machines-A Lean Thinking Solution for Alcohol Industry
 
On the Applied Research Concept Towards Becoming a Winning University
 
Structural Characterization and Corrosion Performance of Super Hard Composite Coating: An Overview
 
MODELLING RATE OF TRAFFIC-INDUCED BUILDING VIBRATIONS IN SANGO-OTA, NIGERIA: AN ASSUMPTION BASED ANALYSIS
 
TURBULENCE FLOW SIMULATION OF MOLTEN METALS IN RUNNERS FOR DEFECT CONTROL IN CASTING OF A SPUR GEAR BLANK
 
Effect of Biomaterial (Citrullus Lanatus Peels) Nanolubricant on the Thermal Performance and Energy Consumption of R600a in Refrigeration System
 
Performance and Energy Consumption Analyses of R290/Bio-Based Nanolubricant as a Replacement for R22 Refrigerant in Air-Conditioning System
 
Effect of Multi-gating System on Solidification of Molten Metals in Spur Gear Casting: A Simulation Approach
 
DESIGN OF A BEVERAGE CAN CRUSHER: A LEAN THINKING SOLUTION FOR ENVIRONMENTAL SUSTAINABILITY IN FOOD AND BEVERAGE INDUSTRIES
 
TECHNICAL INNOVATIONS FOR DEVELOPING COUNTRIES: THE CASE OF A HUMAN-POWERED FRUIT BLENDER
 
BOTTLENECK PROBLEMS ARISING IN INTERINDUSTRY PRODUCTION SETTING AND VERTICAL INTEGRATION: A REVIEW
 
Development of a time-saving precision plantain cutter
 
Modelling and Simulation of Mechanical Wear of Carburized Cutting Tool
 
Constitutive Model to Analyse the effect of Variation in Temperature Distribution on the Rate of Heat Transfer around a Spur Gear Tooth
 
Predictive Modelling of a K-Unit Botttling Plants for Reliability Improvement
 
Forensic Investigation of a Failed Intermediate Starwheel Spur Gear Tooth in a Filler Machine
 
Investigation of the Effect of R134a/Al2O3 –Nanofluid on the Performance of a Domestic Vapour Compression Refrigeration System
 
An Experimental Evaluation of LTA on the performance of a drone
 
Experimental Analysis of the Effect of Tri-Nano Additives on Wear Rate of Mild Steel during Machining
 
MICRO-STRUCTURAL AND MECHANICAL CHARACTERIZATION OF PULVERIZED WOOD CHARCOAL AND EGG-SHELL AS ORGANIC CARBON ADDITIVES FOR GREY CAST IRON CARBURIZATION
 
Effects of Heat Treatment Techniques on the Fatigue Behaviour of Steel Gears: A Review
 
Influence of Von Mises Stress on the Deformation behaviour of a Pinion Spur Gear under Cyclic Loading in a Bottling Machine: An Approach for predicting surface Fatigue failure in Gears
 
Investigation of selected bio-based carburising agents on the mechanical and microstructural characteristics of gray cast iron
 
Production of Biodiesel From Palm Olein With The Aid Of Methanol And Potassium Hydroxide Catalyst
 
Electrochemical study and gravimetric behaviour of gray cast iron in varying concentrations of blends as alternative material for gears in ethanol environment
 
DESIGN, 3D PRINTING AND AUTOMATION OF A MODEL LIGHT DUTY DRILLING MACHINE
 
Design and Fabrication of a Pilot Scale Remote Controlled Electric Car Using Additive Manufacturing Approach
 
FractalWear Behaviour of Gear Tooth: A Review
 
Structural Fabrication and Dynamic Simulation of Stress of a Vibrosieve for Efficient Industrial Applications
 
Factorial Study of Youth Unemployment Problem Using Principal Component Analysis