Availability of wind energy resource potential for power generation at Jos, Nigeria

Availability of wind energy resource potential for power generation at Jos, Nigeria

The objective of this study was to assess the potential viability of the wind resource potential in Jos, Plateau state, Nigeria for power generation. The monthly mean wind speeds that span from 1987 to 2007 were employed to statistically analyze the monthly, annual and seasonal potentials of the wind energy resources at the site. Besides, the results were employed together with...
 
 
 
visit (http://link.springer.com/article/10.1007%2Fs11708-011-0167-5?LI=true)
 
 
O. O. Ajayi, R. O. Fagbenle, J. Katende, J. O. Okeniyi
Ajayi Oluseyi O
 
Other publications by this author (view profile)
 
 
Investigating Potassium Chromate and Aniline Effect on Concrete Steel Rebar Degradation in Saline and Sulphate Media
 
EVALUATION OF THE TEMPERATURE EFFECT OF A THERMOSYPHON SOLAR WATER HEATER
 
Design Optimization of Hot Air Dryer for Yam Flour Chunk
 
Failure Evaluation of Aluminum Alloy in 2 M Hydrochloric Acid in the Presence of Cola acuminata
 
Degradation Study of Aluminum Alloy in 2 M Hydrochloric Acid in the Presence of Chromolaena odorata
 
Performance Evaluation of Potassium Dichromate and Potassium Chromate Inhibitors on Concrete Steel Rebar Corrosion
 
MATERIAL PERFORMANCE INVESTIGATION ON THE FAILURE OF AN AIRCRAFT (ABT-18) NOSE WHEEL STRUT
 
Average Weight Based Quality Control of Nigeria Bakery Industry: A Statistical Approach
 
Simulation of Crack Growth Rate in Martensitic Steel
 
Constitutive Relationship Between Crack Length, Number of Cycles and Stress Amplitudes for Martensitic Steel
 
Simulating Fatigue Propagation Life of Martensitic Steel
 
Computer Aided Plumbing Design
 
Potential and economic viability of standalone hybrid systems for a rural community of Sokoto, North-west Nigeria
 
Effect Of Potassium-Chromate And Sodium-Nitrite On Concrete Steel-Rebar Degradation In Sulphate And Saline Media.
 
Carbon Dioxide Electricity Generation Prospect In Nigeria.
 
Effect of synergies of K2Cr2O7, K2CrO4, NaNO2 and Aniline Inhibitors on the Corrosion Potential Response Of Steel Reinforced Concrete In Saline Medium.
 
Statistical-Based Performance Evaluation Of Inidbitors On The Corrosion Of Steel Rebar In Concrete.
 
Aniline Effect On Concrete Steel Rebar Degradation In Saline And Sulfate Media.
 
Analyses of Corrosion Potential from Inhibitor-Admixed Steel-Reinforced Concrete: Implication on Steel-Rebar Corrosion Risk/Probability
 
Techno-Economic Assessment of Renewable Electricity for Rural Electrification and IT Applications in Selected Sites Across the Geopolitical Zones of Nigeria
 
Wind energy study and energy cost of wind electricity generation in nigeria: past and recent results and a case study for South West Nigeria
 
Solar regime and LVOE of PV embedded generation systems in Nigeria
 
Feasibility and techno-economic assessment of stand-alone and hybrid RE for rural electrification in selected sites of south eastern Nigeria
 
Potential and econometrics analysis of standalone RE facility for rural community utilization and embedded generation in North-East, Nigeria
 
Influence of Plating Parameter and Surface Morphology on Mild Steel
 
Fuel Subsidy Reform and Environmental Quality in Nigeria
 
Analyses of Corrosion Potential from Inhibitor- Admixed Steel-Reinforced Concrete: Implication on Steel-Rebar Corrosion Risk/Probability
 
A Simulation of the Removal of Fuel Subsidy and the Performance of the Agricultural Sector in Nigeria using a Dynamic Computable General Equilibrium Approach
 
Data on the no-load performance analysis of a tomato postharvest storage system
 
Feasibility and Econometrics Assessment of Standalone and Hybrid RE Facilities for Rural Community Utilization and Embedded Generation in North-West, Nigeria
 
Wind Resource Classification and Economic Feasibility of Distributed Generation for Rural Community Utilization in North Central Nigeria
 
Analytical Modelling of Human Arm Locomotion during Dance as a Dynamical Multiple Pendulum System
 
CFD analysis of nanorefrigerant through adiabatic capillary tube of vapour compression refrigeration system
 
DESIGN, CONSTRUCTION AND EVALUATION OF A CYLINDER LAWN MOWER
 
Experimental investigation and FE simulation of the effect of variable control on temperature distribution in orthogonal metal cutting process
 
Development of Thermomechanical Model for the Analysis of Effects of Friction and Cutting Speed on Temperature Distribution around AISI 316L During Orthogonal Machining
 
Energy Pricing Policy and Environmental Quality in Nigeria: A Dynamic Computable General Equilibrium Approach
 
Theoretical Modelling Of Thermal-Hoop Stress Around The Tooth Of A Spur Gear In A Filler Machine
 
Modelling and Control of Flow Induced Vibration of Top–Tensioned Marine Risers Using Analytical Methods
 
Optimization of machine downtime in the plastic manufacturing
 
Process Variability Analysis in Make-to-Order Production Systems
 
Vibration Analysis of the Low Speed Shaft and Hub of a Wind Turbine Using Sub Structuring Techniques
 
Dynamic Modeling and Analysis of Inverted Pendulum using Lagrangian-Differential Transform Method
 
Performance Evaluation and Multidoped Composite Conditioned of A5-type/10%Ti- Sn Alloy: Processing and Properties
 
Development Of A Predictive Model For Productivity In A Beverage Company In Oyo State
 
Process Variability Analysis of License Vehicle Number Plate Production in Nigeria
 
FOULING PHENOMENON AND ITS EFFECT ON HEAT EXCHANGER: A REVIEW
 
Finite Element Modelling of Electrokinetic Deposition of Zinc on Mild Steel with ZnO-Citrus sinensis as Nano-Additive
 
Experimental Investigation of the Effect of ZnO-Citrus sinensis Nano-additive on the Electrokinetic Deposition of Zinc on Mild Steel in Acid Chloride
 
INVESTIGATION OF PRODUCTION OUTPUT FOR IMPROVEMENT
 
MODELING AND OPTIMIZATION OF SURFACE ROUGHNESS IN END MILLING OF ALUMINIUM USING LEAST SQUARE APPROXIMATION METHOD AND RESPONSE SURFACE METHODOLOGY
 
MECHANICAL AND MICROSTRUCTURAL CHARACTERIZATION OF DUCTILE IRON PRODUCED FROM FUEL - FIRED ROTARY FURNACE
 
Data on drying kinetics of a semi-automated gas-fired fish dryer
 
Assessment of Wind Power Potential and Wind Electricity Generation Using WECS of Two Sites in South West, Nigeria
 
WIND ENERGY POTENTIAL FOR POWER GENERATION OF A LOCAL SITE IN GUSAU, NIGERIA
 
Assessment of wind energy potential of two sites in North-East, Nigeria
 
Wind Profile Characteristics and Econometrics Analysis of Wind Power Generation of a Site in Sokoto State, Nigeria
 
Analytical predictive model for wind energy potential estimation: a model for pre-assessment study
 
Rauvolfia vormitoria Effect on the Degradation of Aluminium Alloy in 2.5 M Hydrochloric Acid Solution
 
Thermodynamics Characterization of Density models for an Effective Solar Water Heater Sizing
 
Effect of expression conditions on the yield of Dika Nut (Irvingia Gabonesis) oil under uniaxial compression
 
Environment Induced Failure of Mild Steel in 2 M Sulphuric Acid Using Chromolaena odorata
 
Assessment of utilization of wind energy resources in Nigeria
 
NIGERIA’S ENERGY CHALLENGE AND POWER DEVELOPMENT: THE WAY FORWARD
 
The Potential for Wind Energy in Nigeria
 
Nigeria's energy policy: Inferences, analysis and legal ethics toward RE development
 
Sustainable energy development and environmental protection: Implication for selected states in West Africa
 
Wind profile characteristics and turbine performance analysis in Kano, north-western Nigeria
 
New model to estimate daily global solar radiation over Nigeria