Design and implementation of a prototype remote-controlled pick and place robot

Design and implementation of a prototype remote-controlled pick and place robot

~ F28d462d47987366ebae3b8ab3a4ae83.200x200
There are several mundane and repetitive tasks in recent times that call for the development of effective and efficient robots that can be remotely controlled for safety, accuracy and flexibility. In the work reported here, a versatile and low cost “Pick and Place Robot” that can be remotely controlled is developed. The robot uses two Arduino microcontrollers connected in a master/slave...
 
Published at International Journal of Mechanical Engineering and Technology
Volume 10
Issue 2
Pages 235-247
Published in 2019
 
Download 614.38 kB
 
 
 
Abdulkareem Ademola, Ladenegan, O., Agbetuyi, A.F., Awosope, C.O.A
Abdulkareem Ademola » Engr. Dr. Ademola Abdulkareem is a Senior Lecturer in the Department of Electrical and Information Engineering, Covenant University, Ota, Nigeria. He obtained a Bachelor of Engineering (B.Eng.) in Electrical/Electronic Engineering from the University of Ilorin, Ilorin, Nigeria. He also earned a Master's degree (M.Sc.) in 2008 at the University of Lagos, Lagos, Nigeria, in Electrical and... view full profile
Abdulkareem Ademola
 
Other publications by this author (view profile)
 
 
Determination of Power System Losses in Nigeria Electricity Distribution Networks
 
Investigating the Effect of Asymmetrical Faults at Some Selected Buses on the Performance of the Nigerian 330-kV Transmission System
 
The Use of Three-Phase Fault Analysis for Rating Circuit Breakers on Nigeria 330-kV Transmission Lines
 
Power Line Technical Loss Evaluation based on Line Current from Unbalanced Faults
 
On the Cost Implications of Technical Energy Losses on Nigerian 330-kV Transmission Grid System
 
Contingency Analysis for Assessing Line Losses in Nigeria 330-kV Power lines
 
Development of a Programmable Mobile Robot
 
Investigation of the Performance of Synchronous Generators Equipped with Nonlinear Excitation Controller
 
Modelling and Analysis of Powerline Temperature Surveillance with Optisystem Simulation
 
Pseudo-Inverse Matrix Model for Estimating Long-Term Annual Peak Electricity Demand: The Covenant University Experience
 
Design and Development of An Automatic Three-Phase Sequence Reversal Detection and Correction for Industrial Equipment Structure
 
Critical Review of Different Methods for Siting and Sizing Distributed-generators
 
Prediction of the Voltage Status of a Three‑Phase Induction Motor using Data Mining Algorithms
 
The significance of the mode of voltage imbalance on the operation and energy losses of a 3-phase induction motor
 
Predicting insulation thickness in thermoplastic extrusion process in Nigeria cable industries using artificial neural network
 
Development of a smart autonomous mobile robot for cafeteria management
 
Web based fingerprint roll call attendance management system
 
Development and implementation of a miniature RFID system in a shopping mall environment
 
Nonlinear dynamic simulation of a magnetic levitation system using MATLAB/Simulink
 
Deployment of Power Network Structural Topology to Optimally Position Distributed Generator within Distribution system
 
Effects of Ground Resistivity and Tower Structural Design on Transmission Line Symmetrical Components
 
Development of an Improved Monte Carlo Simulation Algorithm for Reliability Assessment of Large Distribution Systems
 
Predicting Extrusion Process Parameters in Nigeria Cable Manufacturing Industry Using Artificial Neural Network
 
Design of a Pneumatic Soft Actuator Controlled via Eye Tracking and Detection
 
Hand gesture control and design of a rotary pneumatic soft actuator using leap motion sensor