Dr. Ademola Abdulkareem
Senior Lectrurer; Dept. of Electrical and Information Engineering
PhD, MSc, B.Eng, M.N.S.E, R.Engr (COREN)
College
Department
Programme
Research Interests
• Optimization of Power System Network and Security
• Power System Investment Planning,
• Smart Power Distribution System and Intelligent Building, Energy
• High Voltage Engineering (Cable Processing Technology and Materials)
• Energy Management and Renewable Energy
• Electric Energy Industry Restructuring.
Awards & Honours
- 1986/1987 Academic Session, Unilorin Best Overall Student in Elect/Elect Engineering Class (B.Eng. 200L Examinations)
- Best Senior Staff worker of the year 2004 (Kabelmetal Nigeria PLC, Ikeja-Lagos)
- Nexans Kabelmetal Nigeria Plc Scholarship on training for technical processing of high voltage cables at Hannover, Germany 2005.
Teaching Areas
• Electrical Power Systems
• Electrical Machine
• Control Systems
• Electrical Measurements & Instrumentation
• Advanced Instrumentation
• Introduction to Power System
• Engineer in Society
• Advanced Electrical Power System and Protection
• Dynamics Modeling of Electrical Machines and Control
Current Postgraduate Supervision
• Olowo, O. O. – M.Eng. (2017). Modelling and Analysis of Power line Temperature Surveillance with Opti-System Simulation: A Case Study of Nigeria 330kV Network. Covenant University, Ota, Nigeria.
• Adesanya, A. O. – M.Eng. (2019). Predicting Extrusion Process Parameters in Nigeria Cable Manufacturing Industries Using Artificial Neural Network. Covenant University, Ota, Nigeria.
• Ogbe, D – M. Eng in view. Optimal Phasor Measurement Unit Placement on Nigeria 330-kV New Grid using Genetic Algorithm. Covenant University, Ota, Nigeria.
• Abubakar, John. – M. Eng in view. Fault Location and Classification for Power Transmission line using Artificial Neural Network. Covenant University, Ota, Nigeria.
• Somefun, T. E. – PhD in view (Co-Supervisor). Optimal Sizing and Placement of Distributed Generators in a Distribution System Based on Network Topology. Covenant University, Ota, Nigeria.
• Adesanya, A. O. – M.Eng. (2019). Predicting Extrusion Process Parameters in Nigeria Cable Manufacturing Industries Using Artificial Neural Network. Covenant University, Ota, Nigeria.
• Ogbe, D – M. Eng in view. Optimal Phasor Measurement Unit Placement on Nigeria 330-kV New Grid using Genetic Algorithm. Covenant University, Ota, Nigeria.
• Abubakar, John. – M. Eng in view. Fault Location and Classification for Power Transmission line using Artificial Neural Network. Covenant University, Ota, Nigeria.
• Somefun, T. E. – PhD in view (Co-Supervisor). Optimal Sizing and Placement of Distributed Generators in a Distribution System Based on Network Topology. Covenant University, Ota, Nigeria.
Selected Publications (26)
1. Hand gesture control and design of a rotary pneumatic soft actuator using leap motion sensor
[Visit]2. Design of a Pneumatic Soft Actuator Controlled via Eye Tracking and Detection
[ Download 1.66 MB ]
[
Download
2.34 MB
]
[
Download
388.26 kB
]
[
Download
907.41 kB
]
[
Download
318.18 kB
]
8. Development and implementation of a miniature RFID system in a shopping mall environment
[ Download 497.70 kB ]9. Web based fingerprint roll call attendance management system
[ Download 877.54 kB ]11. Design and implementation of a prototype remote-controlled pick and place robot
[ Download 614.38 kB ]
[Visit]
[
Download
1.55 MB
]
14. Prediction of the Voltage Status of a Three‑Phase Induction Motor using Data Mining Algorithms
[Visit]15. Critical Review of Different Methods for Siting and Sizing Distributed-generators
[ Download 494.14 kB ]
[
Download
639.63 kB
]
[
Download
1,001.74 kB
]
18. Modelling and Analysis of Powerline Temperature Surveillance with Optisystem Simulation
[ Download 393.99 kB ]
[
Download
5.36 MB
]
20. Development of a Programmable Mobile Robot
[ Download 929.90 kB ]21. Contingency Analysis for Assessing Line Losses in Nigeria 330-kV Power lines
[ Download 5.61 MB ]22. On the Cost Implications of Technical Energy Losses on Nigerian 330-kV Transmission Grid System
[ Download 2.43 MB ]23. Power Line Technical Loss Evaluation based on Line Current from Unbalanced Faults
[ Download 985.74 kB ]
[
Download
533.84 kB
]
[
Download
779.11 kB
]
Collaboration/Linkages
• Reviewer –1st Electrical and Information Engineering (EIE), International Conference held on 16th-18th October 2011 at Covenant University, Canaan land, Ota, Ogun State, Nigeria.
• Reviewer –2nd EIE International Conference held on 21st -23rd November 2012 at Covenant University, Canaan land, Ota, Ogun State, Nigeria.
• Panel of Examiners for a PhD Oral (VIVA) defense thesis submitted to Department of Languages and General Studies, College of Leadership Development Studies, Covenant University, Ota, Nigeria, 2018.
• External Examiner for the M.Tech. Oral defense examination of Post Graduate Students at Ladoke Akintola University of Technology, Department of Electronic and Electrical Engineering. Oyo State, Nigeria, March 10th, 2020.
• Nominated as External (Foreign) examiners for a PhD thesis, titled “Design of QFT Controller and Prefilter Algorithm for MIMO systems” for submission and examination to Visvesvaraya Technological University (VTU), Belagavi, Karnataka, India, 2019/2020.
• Technical Committee Member in the 2020 3rd International Conference on Power and Smart Grid (ICPSG 2020), held in Kuala Lumpur, Malaysia on May 29-31, 2020.
• Reviewer – Journal of Engineering Research and Reports, June, 2020
• Invited as Guest Speaker and Chair Technical Committee at the 2021 4th Asia Conference on Energy and Electrical Engineering (ACEEE 2021) to be held in Bangkok, Thailand during March 12-14,2021 together with its workshop 2021 4th International Conference on Power and Smart Grid (ICPSG2021).
• Reviewer –2nd EIE International Conference held on 21st -23rd November 2012 at Covenant University, Canaan land, Ota, Ogun State, Nigeria.
• Panel of Examiners for a PhD Oral (VIVA) defense thesis submitted to Department of Languages and General Studies, College of Leadership Development Studies, Covenant University, Ota, Nigeria, 2018.
• External Examiner for the M.Tech. Oral defense examination of Post Graduate Students at Ladoke Akintola University of Technology, Department of Electronic and Electrical Engineering. Oyo State, Nigeria, March 10th, 2020.
• Nominated as External (Foreign) examiners for a PhD thesis, titled “Design of QFT Controller and Prefilter Algorithm for MIMO systems” for submission and examination to Visvesvaraya Technological University (VTU), Belagavi, Karnataka, India, 2019/2020.
• Technical Committee Member in the 2020 3rd International Conference on Power and Smart Grid (ICPSG 2020), held in Kuala Lumpur, Malaysia on May 29-31, 2020.
• Reviewer – Journal of Engineering Research and Reports, June, 2020
• Invited as Guest Speaker and Chair Technical Committee at the 2021 4th Asia Conference on Energy and Electrical Engineering (ACEEE 2021) to be held in Bangkok, Thailand during March 12-14,2021 together with its workshop 2021 4th International Conference on Power and Smart Grid (ICPSG2021).
Conferences Attended
• 1st EIE International Conference held on 16th-18th October, 2011 at Covenant University, Cannanland, Ota, Ogun State, Nigeria.
• 2nd EIE International Conference held on 21st -23rd November, 2012 at Covenant University, Cannanland, Ota, Ogun State, Nigeria
• Ademola Abdulkareem, C. Etukudor, C. Ekechi (2016) “Design and Analysis of a Solar-Wind Hybrid Renewable Energy for Electricity generation” Energy Systems Conference 21st Century Challenges. 14 -15 June 2016, QEII Centre, Westminster, London, UK
• Ademola Abdulkareem and Awosope C. O. A. “Renewable Energy Potentials of West-African Super Grid” Energy Systems Conference 21st Century Challenges. 14 -15 June 2016, QEII Centre, Westminster, London, UK
• Ademola Abdulkareem, A. S Alayande, C. O. A. Awosope, “Faster Approaches for Critical bus Identification for Power System Voltage Security Assessment” Energy Systems Conference 21st Century Challenge 14-15 June 2016, QEII Centre, Westminster, London, UK
• Ademola Abdulkareem, A. Adesanya, O. Popoola, C. O. A. Awosope, “Predicting Insulation Thickness in Thermoplastic Extrusion Process in Nigeria Cable Industries Using Artificial Neural Network”, The World Congress on Engineering and Computer Science (WCECS 2019) San Francisco, USA, 22-24 October, 2019.
• Ademola Abdulkareem, C. O. A. Awosope, O. O. Opeyemi, K. Okokpujie “Development and Implementation of Web-Based Advanced Traveller Information System”, The World Congress on Engineering and Computer Science (WCECS 2019) San Francisco, USA, 22-24 October, 2019.
• Gbenga, A., Hope, O., Ademola Abdulkareem, Anthony, A., Simeon, M.” The Influence of Meteorological Features on the Performance Characteristics of Solar Photovoltaic Storage System”, Journal of Physics: Conference Series, 1378(3),032088, 2019.
• Afolalu, S.A, Babaremu, K.O., Ongbali, S.O., Ademola Abdulkareem, Adejuyigbe, S. B. “Overview Impact of Application of Queuing Theory Model on Productivity Performance in A Banking Sector”, Journal of Physics: Conference Series 1378(3),03203, 2019.
• Afolalu, S.A., Oladipupo, S., Ongbali, S.O., Ademola Abdulkareem, Oloyede Olamilekan., “Quenching A Significant Index Control in Heat Treatment - An Overview”, Journal of Physics: Conference Series 1378(3),032034, 2019.
• 2nd EIE International Conference held on 21st -23rd November, 2012 at Covenant University, Cannanland, Ota, Ogun State, Nigeria
• Ademola Abdulkareem, C. Etukudor, C. Ekechi (2016) “Design and Analysis of a Solar-Wind Hybrid Renewable Energy for Electricity generation” Energy Systems Conference 21st Century Challenges. 14 -15 June 2016, QEII Centre, Westminster, London, UK
• Ademola Abdulkareem and Awosope C. O. A. “Renewable Energy Potentials of West-African Super Grid” Energy Systems Conference 21st Century Challenges. 14 -15 June 2016, QEII Centre, Westminster, London, UK
• Ademola Abdulkareem, A. S Alayande, C. O. A. Awosope, “Faster Approaches for Critical bus Identification for Power System Voltage Security Assessment” Energy Systems Conference 21st Century Challenge 14-15 June 2016, QEII Centre, Westminster, London, UK
• Ademola Abdulkareem, A. Adesanya, O. Popoola, C. O. A. Awosope, “Predicting Insulation Thickness in Thermoplastic Extrusion Process in Nigeria Cable Industries Using Artificial Neural Network”, The World Congress on Engineering and Computer Science (WCECS 2019) San Francisco, USA, 22-24 October, 2019.
• Ademola Abdulkareem, C. O. A. Awosope, O. O. Opeyemi, K. Okokpujie “Development and Implementation of Web-Based Advanced Traveller Information System”, The World Congress on Engineering and Computer Science (WCECS 2019) San Francisco, USA, 22-24 October, 2019.
• Gbenga, A., Hope, O., Ademola Abdulkareem, Anthony, A., Simeon, M.” The Influence of Meteorological Features on the Performance Characteristics of Solar Photovoltaic Storage System”, Journal of Physics: Conference Series, 1378(3),032088, 2019.
• Afolalu, S.A, Babaremu, K.O., Ongbali, S.O., Ademola Abdulkareem, Adejuyigbe, S. B. “Overview Impact of Application of Queuing Theory Model on Productivity Performance in A Banking Sector”, Journal of Physics: Conference Series 1378(3),03203, 2019.
• Afolalu, S.A., Oladipupo, S., Ongbali, S.O., Ademola Abdulkareem, Oloyede Olamilekan., “Quenching A Significant Index Control in Heat Treatment - An Overview”, Journal of Physics: Conference Series 1378(3),032034, 2019.
Summary of Profile
Engr. Dr. Ademola Abdulkareem is a Senior Lecturer in the Department of Electrical and Information Engineering, Covenant University, Ota, Nigeria. He obtained a Bachelor of Engineering (B.Eng.) in Electrical/Electronic Engineering from the University of Ilorin, Ilorin, Nigeria. He also earned a Master's degree (M.Sc.) in 2008 at the University of Lagos, Lagos, Nigeria, in Electrical and Electronics Engineering. Besides, he holds a Ph.D. degree in Electrical and Electronics Engineering with an emphasis in Electric Power and Machine from Covenant University, Nigeria. Ademola has contributed to high performance and energy-efficient electric power systems and high voltage (cable) engineering, which form the underlying technologies for efficient and competitive industries, energy security, and effective electrical power engineering and utility industries. He is a Nigerian Society of Engineers (MNSE) corporate member and registered with the Council for the Regulation of Engineering in Nigeria (COREN).
Before relocating to an academic institution (Covenant University), Ademola has a vast industrial knowledge through having worked with the largest power and telecommunication cable manufacturing company in Nigeria (Nexans Kabemetal Nigeria Plc) for 11 years (1994 -2005). He also worked with MicCom Cable and Wire Limited as a Factory Manager. While at Nexans Kabelmetal Nigeria Plc, he was sent overseas training to Hannover and Vacha in Germany for the process technology of high and medium voltage cables. He is currently working on the locally sourced materials as an alternative design and construction of high voltage cables. His main research interest includes Power Systems Quality and Control, High Voltage Engineering, Energy Management and Renewable Energy, Smart Power Distribution System and Intelligent Building, energy. He has published articles in several learned journals.
Before relocating to an academic institution (Covenant University), Ademola has a vast industrial knowledge through having worked with the largest power and telecommunication cable manufacturing company in Nigeria (Nexans Kabemetal Nigeria Plc) for 11 years (1994 -2005). He also worked with MicCom Cable and Wire Limited as a Factory Manager. While at Nexans Kabelmetal Nigeria Plc, he was sent overseas training to Hannover and Vacha in Germany for the process technology of high and medium voltage cables. He is currently working on the locally sourced materials as an alternative design and construction of high voltage cables. His main research interest includes Power Systems Quality and Control, High Voltage Engineering, Energy Management and Renewable Energy, Smart Power Distribution System and Intelligent Building, energy. He has published articles in several learned journals.
Curriculum Vitae
UPDATED CV (2020).pdf
927.42 kB
